Material used in production.

3/16" plate (.190 thick)

Alclad 3004-H34; Alclad 3004-H34 (MAKER MAY VERY)

Component    Wt. %
Al 95.5 - 98.2  
Cu Max 0.25  
Fe Max 0.7  
Component    Wt. %
Mg 0.8 - 1.3  
Mn 1 - 1.5  
Other, each Max 0.05  
Component    Wt. %
Other, total Max 0.15  
Si Max 0.3  
Zn Max 0.25  

Material Notes:
Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN.

Physical Properties Metric English Comments
Density 2.72 g/cc 0.0983 lb/in³  For AA3004 (Not Alclad)

Mechanical Properties
Ultimate Tensile Strength 241 MPa 35000 psi  AA; Typical
Tensile Yield Strength 200 MPa 29000 psi

 

Tensile strength

From Wikipedia, the free encyclopedia

Tensile strength measures the force required to pull something such as rope, wire, or a structural beam to the point where it breaks.

Specifically, the tensile strength of a material is the maximum amount of tensile stress that it can be subjected to before failure. The definition of failure can vary according to material type and design methodology. This is an important concept in engineering, especially in the fields of material science, mechanical engineering and structural engineering.

There are three typical definitions of tensile strength: